JT600 FUEL LEVEL SENSOR



Combined with the top sensor technology in the world, JT600 capacitive fuel level sensor was independently developed by JOINTECH , a number of innovative patented technologies enable JT600 to continuously detect the liquid level with the high resolution(<1mm), as well as adjust the length to fit different fuel tanks on the spot, and replace the original vehicle fuel level sensor to connect the original fuel meter.

JT600 has been widely applied to the remote fuel consumption monitoring and management of logistics fleet, genset, buses, coaches, construction machineries, etc.
functions

Can cut off Fuel sensor could be cut off according to fuel tank size on site, Avoid tolerances caused by wrong size
High-precision Recognition accuracy is less than 1mm, The sensor can identify the level fluctuation of less than 1mm.
Simple installation Patented design simple mounting flanges, Install the sensor does not need another dozen screw holes Press button for full and empty calibration on site
Wide input voltage, high and circuit protection 4-70V wide input voltage range, make sure that the sensor is not under the influence of the input voltage. Multi circuit protection, reverse connection protection, short circuit protection.
Multi-signal output Voltage output (10-5V), current output (4-20mA), resistance output (0-500Ω) Digital signal output: RS232,RS485, Meet the remote monitoring and control while driving the car gauge
functions

Index Parameter
Acquisition Principle Capacitive
Power Input 4-70V
Power Consumption 0.13W/5V,0.19W/12V,0.38W/24V
Accuracy Resolution: <1mm, Accuracy: <0.5%<>
Communication Interface RS-232, RS-485, CAN (Customizable)
Baud Rate 2400，4800，9600，57600，115200 (or customized by users)
Output Voltage : 0-5V, Current: 4-20mA,  Resistance: 10-500Ω
Measuring Range 10CM-150CM
Protection Grade IP67
Housing Material Aluminum alloy
Operating Temperature －40°C ~~＋85°C
Storage Temperature －40°C ~~＋105°C
Weight 400g (500mm)
Size 550mm, 750mm, 1000mm (Customizable)
Key Features

Resolution: <1mm , Accuracy:  <0.5%<>
Wide voltage input: 4-70V
Multi-signal output: RS485/RS232/Voltage/Resistance/Current
Replaceable for the original fuel level sensor
Patented technology: Simple-installation flange
Cuttable on site to fit the tank height 
On-site calibration and remote parameter configuration
Specification

Size 550mm, 750mm, 1000mm (Customizable)
Weight 400g (500mm)